Description:
Sw1009P Is A Poe Switch Provides Power And Data From A Single Point, Using Power Over Ethernet(Poe) Over A Single Cat-5 Cable. It Also Can Be Used For Any 10/100Mbps Link And Supply Industry -Standard Ieee 802.3Af Power. Advanced Auto-Sensing Algorithm Gives Power To 802.3Af End Devices? In Addition, The Poe Switch Automatically Determines Poe Requirements, Speed, Duplex, Easy To Operate And Reliable. In A Word, Sw1009P Is Ideal For Powering Poe Devices Such As Ip Cameras, Wlan Access Points, Ip Phones, Office Access Control Systems, And Other Pd Devices And Offers A Line Of High Quality Products That Provide A Total Solution For Ethernet Application In Different Environments.
Features:
Fully Ieee802.3Af Standard Compliant.
Support Poe Power Up To 15.4W For Each Poe Ports.
Auto Detect Powered Device(Pd).
Safe And Reliable Power To Most Of Poe End Device.
Plug & Play. No Configuration Required Reliable And Great Value.
Specification:
Network Ports :8*10/100Mbps Auto Sensing Fast Ethernet Ports
:1*10/100Mbps Rj45 Uplink Port
Administrative Switch Management :Ieee802.1 Q Static Vlan (128 Groups, Static)
:Ieee802.1P Class Of Service (Cos)
:Port Based Qos
:Dscp-Based Qos
:Ieee802.3 And Link Aggregation (Manual Or Lacp)
:Ieee802.1 D Spanning Tree Protocol
:Snmp V1,V2C,V3 -Rfc 1213 Mib Ii
:Rfc 1643 Ethernet Interface Mib
:Rfc 1493 Bridge Mib
:Rmon Group 1,2,3,9
:Rfc 2131 Dhcp Client
:Port-Based Security By Locked Mac Addresses
:Mac Acl
:Storm Control For Broadcast ,Multicast And Unicast Packets
Standards :Ieee 802.3U, Ieee 802.3I, Ieee 802.3X, 802.3Af
Led Indicators :System-Power, Poe Maximum Power
:Per Port- Link, Activity, Speed Poe Active, Poe Error
Poe Power :15.4W Per Port (Ieee802.3Af)
:Wiring: Data & Power Provided Over Pairs1/2And 3/6 Or 4/5(+)And 7/8(-)
Processing Types :Store-And-Forward
:Half-Duplex Back Pressure And Ieee802.3X Full- Duplex Flow Control
Address Database Table Size :8000Mac Address
Buffer Memory :48Kb Embedded Memory Per Unit
